24V - 36V DC 2 Phase Simple Mirco - Step Stepper Motor Drivers CW230

24V - 36V DC 2 Phase Simple Mirco - Step Stepper Motor Drivers CW230

Characteristics:

1. DC power input type 24V~36V
2. Output current:0.9～3A
3. Mircostep:1(1.8º),1/2,1/4,1/8,1/16,1/32,1/64
4. Protect form : Overheated protect, lock automatic half current ,error connect protect
5. Dimension:115mm*72mm*32mm
6. Weight:<300g.
7. Working environment:Temperature-15～40℃Humidity<90%.

NOTE:
1.When ambient temperature is high or working current over 2A, fix the module on big metal shell ,or use axle flows fan dispels the heat, to make the module run reliably for a long time.
2.Half current automatically: if control machine not send out signal in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric.
3.The fault phase is protected : When the double-phase electrical machinery is connected with driver , users are apt to connect the phase by mistake, thus would damage the driver seriously. The protecting circuit is within this driver,when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake , and output is small. Please check whether the wiring of electrical machinery is a mistake.

Switch Choice: (“ON=0,OFF=1”)
1.Microstep choice

2.Current choice:

Dimension:(mm)

car stepper motor

nema 23 stepper motor

24V - 36V DC 2 Phase Simple Mirco - Step Stepper Motor Drivers CW230 Images